Science
Fact Checked

What is Galvanizing?

Eric Tallberg
Eric Tallberg

A process by which zinc is coated over corrosive metals is known as galvanizing. It is actually a method of coating corrosive metals, such as steel and iron, with a non-corrosive metal. Zinc is melted and applied, usually via what’s known as a hot dip, to the metal, providing a coating of corrosion protection from one mil (0.001 of an inch or 0.0254 mm) to just over four mils (0.004 inches or 0.1016 mm) thick. When cured, the zinc, through reaction with the coated metal, becomes zinc carbonate.

The galvanizing process not only prevents corrosion of various “soft” metals, but adds to the strength of the original, uncoated metal. Obviously, galvanized metal is thicker than uncoated metal, so fittings and fastenings are generally measured with the additional coating thickness in mind. Various American Society for Testing and Materials (ASTM) specifications provide guidelines and continuity for the thickness of galvanized metals.

Galvanized nails are covered with a protective zinc coating.
Galvanized nails are covered with a protective zinc coating.

Galvanization of nails and screws is the most common method of preventing the unsightly staining seen on many types of house siding. Non-galvanized steel nails and screws, when used outdoors, will “bleed” when they corrode, causing dark stains on the siding. This staining is only eliminated by re-painting the siding. Staining on a building facade due to corroded nails, screws, or other types of fasteners, is not only ugly, but also indicates that, because they're not galvanized, the fasteners are deteriorating and must be replaced.

Corrosive metals are coated with zinc through a process known as galvanizing.
Corrosive metals are coated with zinc through a process known as galvanizing.

The hot dip procedure to galvanize metals is essentially a bath of molten zinc. The zinc is kept liquefied at a temperature of about 860°F (460°C) and the metals to be coated are dipped into or, in some cases, fed through this zinc bath. Prior to dipping, metals are cleaned and prepped for the hot dip by pickling in a light acid solution. The zinc coating is ordinarily distinguishable from shiny bare steel or iron in that it is a dull, medium gray. Magnesium is put into the hot dip solution when galvanized metals are to be used in a marine environment.

Non-galvanized steel nails and screws may cause stains on house siding that may only be eliminated with new paint.
Non-galvanized steel nails and screws may cause stains on house siding that may only be eliminated with new paint.

Electro-galvanizing is an electrolytic process where a thinner, tighter-bonding coat of zinc is applied to a metal via electroplating. In this process, an electric current is passed through a zinc compound, positively charging the zinc ions to adhere more securely to the conductive primary metal. It provides a somewhat stronger tensile strength to the coated metal by virtually impregnating the metal with zinc. This process is most commonly employed with iron or steel beams, angle-irons, and other items that are to be used in building construction. Hot dip and electro-galvanizing are the most common of several methods of galvanizing metal.

You might also Like

Discuss this Article

Post your comments
Login:
Forgot password?
Register:
    • Galvanized nails are covered with a protective zinc coating.
      By: Denis Dryashkin
      Galvanized nails are covered with a protective zinc coating.
    • Corrosive metals are coated with zinc through a process known as galvanizing.
      By: alephcomo1
      Corrosive metals are coated with zinc through a process known as galvanizing.
    • Non-galvanized steel nails and screws may cause stains on house siding that may only be eliminated with new paint.
      By: Colin Buckland
      Non-galvanized steel nails and screws may cause stains on house siding that may only be eliminated with new paint.
    • Galvanized steel bucket.
      Galvanized steel bucket.
    • Galvanized steel quonset hut.
      By: pseudo obscure
      Galvanized steel quonset hut.
    • The galvanization of screws prevents the unsightly "bleeding" stains seen on many types of house siding.
      By: Boca
      The galvanization of screws prevents the unsightly "bleeding" stains seen on many types of house siding.
    • Galvanized nails won't rust easily, making them preferred for construction.
      By: creative soul
      Galvanized nails won't rust easily, making them preferred for construction.